中文字幕一区二区三区乱码,亚洲一级av不卡毛片无码,98热视频在线观看免费观看,国产美女裸露试看免费看视频,91麻豆国产福利免费在线观看
NEWS
新聞中心
NEWS
新聞中心
CONTACT
聯(lián)系我們

Contact Person: Miss Wang

Phone: 15999898070

Telephone: 0769-87883409

Email: cl-tk@chulun.com.tw

Address: Room 101, Building 4, No.8 Qinghe Road, Huangjingkeng, Huangjiang Town, Dongguan City, Guangdong Province

INDUSTRY

Texas domestic automatic terminal machine

Author:Dongguan julun Machinery Co., Ltd. View:0 Time:2021-07-23

Dezhou domestic automatic terminal machine

For such problems, what we have to do is to find a solution. If we want to prevent the terminal machine from being disturbed by noise, we must first choose a reasonable tool and improve its installation accuracy. ; At the same time, we must improve the cutting process of the terminal machine. If it is a slender workpiece, try to choose ninety degrees for cutting. In this way, the noise problem of the terminal machine should be alleviated.


1


2


JulunFully automatic terminal machineClosing height (Pressing height) adjustment: When the closing height of the automatic terminal machine is not suitable or the adjustment of the mold pressing height micro-adjuster plate is not enough, it can be realized by adjusting the adjustment joint and loosening the round nut. Insert the adjusting rod into the round hole on the adjusting joint and turn it. Turning left will decrease the pressing height, and turning right will increase the pressing height (the engraved line on the adjusting joint is 0.1mm per grid, and one turn is 3mm). From high to low, adjust to the proper compression of the wires and terminals. It should not be too tight. Too tight will easily damage the upper and lower die blades.

Dezhou domestic automatic terminal machine

And all kinds of USB wiring harness manufacturers. The company has advanced pressure monitoring laser cutting equipment and technology, and pressure monitoring has Japan and Taiwan. We are rated as a high-tech enterprise, our company specializes in the production of laser equipment technology enterprise, Guangdong ultra-fine coaxial line processing. Coaxial line, co2 laser head stripping machine, thin coaxial wire stripping machine. We provide process guidance and comprehensive equipment training.

Market demand for brand new terminal machines: What is the difference between semi-automatic terminal machines and automatic terminal machines? Which is better? 1. The automatic terminal machine is a terminal machine that integrates a server (silent type). Its operating principle is not the same as that of a general terminal machine. It only needs to send a message to the server, and this information is then transmitted to the motor. A movement can be made by attacking the automatic terminal machine. 2. Semi-automatic terminal machine, we generally call it terminal machine, which is the kind of vertical desktop terminal machine that we often see in the general market now.

The principle of the automatic terminal stripping machine is: after the metal wire is input to the wire feeding wheel through the straightening machine, the wire feeding roller is driven by the stepping motor, and the lower right roller will make The processing line moves left and right; the blade is driven by a stepping motor, and the up and down directions are opposite. In terms of control, after the interval between the lower blades of the automatic terminal machine, the functions of stripping and trimming can be realized. The stepping motor drives the upper left roller and the lower roller (the twisting wheel and the appearing roller physically refer to the same liquid wheel) to move back and forth in opposite directions to achieve the torque function. The fault of the terminal machine is briefly introduced into three parts: peeling fault, terminal fault and soldering fault.


3


Dezhou domestic automatic terminal machine

The daily maintenance precautions of the automatic terminal machine have been introduced here. You can learn more about it, and we should pay more attention to it when we use it. This is for us There is better assistance. Be careful when using the automatic terminal machine. If you need to buy automatic terminal machines, automatic pipe cutting machines, corrugated pipe cutting machines and other mechanical equipment, you can call Contact us,

Dezhou domestic automatic terminal machine


4


Automatic terminal machine molds generally include two parts: a movable mold and a fixed mold (or a punch and a female mold), which can be separated or combined. The parts are taken out when they are separated, and the blanks are injected into the mold cavity to form when they are closed. The mold is a precision tool with a complex shape and can withstand the expansion force of the blank. It has high requirements for structural strength, rigidity, surface hardness, surface roughness and processing accuracy. The development level of mold production is an important symbol of the level of mechanical manufacturing. one. The new terminal machine mold will encounter those problems

Terminal machine trial production 10PCS sent to IPQC for the first piece confirmation, and the inspection is OK before mass production can be carried out. During the workshop production process, the operator must self-check whether the terminal is packaged Adhesives, hanging necks, etc. are defective, and the terminal machine tensile test is carried out every 1 hour. Multiple inspections can avoid more losses for the enterprise. Thereby strengthening the cost saving of the factory. After the workshop production is completed, the good and waste products are sorted out, and the environment around the automatic terminal machine is cleaned. The new terminal machine classification: how many square wires should be used and how many tonnage terminal machines, which can be classified as automatic terminals Terminal machine, even stripping machine, ultra-quiet terminal machine, pneumatic terminal machine, terminal machine, computer wire automatic stripping machine, pin terminal machine, gold wire terminal machine, etc. 1. Fully automatic terminal machine can be divided into: 1. Fully automatic single-head crimping terminal machine (using PLC or single-chip control, this type of domestic equipment can realize about 5000pcs wire cutting, peeling, and single-end crimping terminal per hour. It can automatically detect the crimping quality of the terminal, which is more popular in the domestic market)

Applying the inner cavity shape can make the blank obtain the corresponding three-dimensional shape. The mold generally includes two parts: a movable mold and a fixed mold (or a convex mold and a concave mold), which can be separated or combined. The parts are taken out when they are separated, and the blanks are injected into the mold cavity to form when they are closed. The automatic terminal machine mold is a precision tool with a complex shape and can withstand the expansion force of the blank. It has high requirements for structural strength, rigidity, surface hardness, surface roughness and processing accuracy. The development level of mold production is an important symbol of the level of mechanical manufacturing. one.


5


How much is an automatic terminal crimping machine? What are the functions of the automatic terminal crimping machine? The automatic terminal crimping machine is an all-in-one machine for planting, stripping, and pressing. It has comprehensive functions and is a new type of equipment that is very popular in the market. Dongguan Julun Machinery Co., Ltd. has newly released a new automatic terminal machine up to 8,000 per hour. The automatic terminal machine is currently the faster wire stripping in the domestic market. Machine (ie stripping terminal machine) terminal crimping machine. Dongguan Julun Machinery serves customers more. Good products and services

Its operating principle is different from the above. It only sends a message to the server, which is then sent to the motor to form an action. Fully automatic terminal machine: As long as the wire is put on, the terminal mold is set up, and the parameters are set in the screen, it can be produced. Terminal machines can be classified into pneumatic terminal machines, terminal machines,Ultra-quiet terminal machine, automatic terminal machine ,Continuous terminal cutting PIN machine, evenstripping and tapping terminal machine, semi-automatic ultra-quiet terminal machine,

Dezhou domestic automatic terminal machine

The automatic terminal machine peels badly: the peeling time varies. There are many reasons for different stripping lengths. The common stripping length is too tight or too loose. At this time, it is only necessary to properly adjust the open space between the two wheels until the wire cannot be pulled by hand. On the other hand, this may be a problem with the blade. The blade is cut too deep or too shallow, and even the blade is installed at an angle, which may also cause this result. At this time, it is necessary to adjust the position of the blades as needed. If it is caused by damage to the blade, it is recommended to replace the blade immediately. Inconsistent cutting lengths Inconsistent cutting lengths may be due to blade or blade wear; to encounter such a problem, simply replace the cutter with a new one.


6


7


After finishing the processing of a line of Dezhou-made automatic terminal machine, paste a sticker on the rubber tray, and be sure to indicate the type of automatic terminal machine used for the line and the specifications of the line And for the processing of the same number of lines, the domestic automatic terminal machine in Texas must re-check to confirm the opening and stripping length of the automatic terminal machine and whether the opening effect is qualified after the equipment continues to operate for 1 hour. Continue production after confirming the qualification. You can try the new terminal machine operation method of Julun Machinery. Introduction to the five installation steps of the automatic terminal machine.


Dezhou domestic automatic terminal machine


8


1. Preparations before operation of the fully automatic terminal machine: (1) Check whether the new crimping machine and die are installed firmly, and whether the foot switch and power socket are firmly inserted. (2) Check whether the power supply voltage is consistent with the specified voltage (220V). (3) Fix the terminal roll and guide the terminal into the die through the guide plate. (4) Adjust the crimping height and manually operate the pressure test terminal. (5) After pulling the main shaft in place with an open-end wrench, remove the open-end wrench. 2. Julun automatic terminal machine is operated manually.



News
Related Product
Online Service
contact details

contact number:

0769-87883409

Pre-sales advice:

15999898070

Business mailbox:

cl-tk@chulun.com.tw

QR code
C S
中文字幕一区二区三区乱码,亚洲一级av不卡毛片无码,98热视频在线观看免费观看,国产美女裸露试看免费看视频,91麻豆国产福利免费在线观看